Here are some sample questions and answers for the NS0 158 NetApp certification exam. This is also called as NCDA Netapp Certified Data Administrator for cluster mode Netapp data on tap 9.1.
These are sample questions and not the expected question for the real exam.
Q 1. Regarding storage failover giveback processes, which st.atement is true?
- A. During giveback, node cl1-01 simultaneously returns ownership of both root and data aggregates to cl1-02.
- B. During giveback, node cl1-01 returns ownership of all aggregates to cl1-02, before reverting the data LIFs back to the home ports.
- C. During giveback, node cl1-01 returns ownership of the root aggregate to cl1-02 before returning ownership of the data aggregates.
- D. During giveback, node cl1-01 moves ownership of the root aggregate to cl1-04 and ownership of the data aggregates to cl1-04.
Answer: C
Explanation:
The following process takes place in a normal giveback. In this discussion, node A has taken over node B. Any issues on Node B have been resolved and it is ready to resume serving data.
References:
NO.2 A customer has a 1,000 GB volume used as a NAS share that has 3x 100 GB files and has no existing Snapshot copies.
The customer creates a Snapshot copy of the volume, adds a 500 Gb file to the volume, and then deletes one of the 100 GB files from the volume. How much free space is in the volume in this scenario?
A. 500 GB
B. 200 GB
C. 300 GB
D. 600 GB
Answer: B
Explanation:
Snapshot copies minimize disk consumption by preserving individual blocks rather than whole files. Snapshot copies begin to consume extra space only when files in the active file system are changed or deleted. When this happens, the original file blocks are still preserved as part of one or more Snapshot copies.
NO.3 Which NetApp management tool verifies the disk-shelf cabling of an existing NetApp cluster?
A. System Setup
B. Config Advisor
C. OnCommand Unified Manager
D. OnCommand System Manager
Answer: B
Explanation:
NetApp Config Advisor is a tool that will allow you to check the health and ensure your NetApp infrastructure is adhering to NetApp best practices. Once the Config Advisor query finishes, view the results and take corrective action on any configuration issues.
NO.4 You are configuring an ONTAP solution for FC host connectivity.
In this scenario, how should the cluster be configured? (Choose two.)
A. The SVM must be configured for Ethernet LIFs.
B. FC ports must be configured as initiators.
C. FCP must be licensed on the cluster.
D. FC ports must be configured as targets.
Answer: C, D
Explanation:
You can configure the FC and the FCoE protocols on the SVM for SAN hosts. LIFs are created on the most suitable adapters and assigned to port sets to ensure data path redundancy.
Based on your requirements, you can configure either FC, FCoE, or both the protocols. Before you begin The FCP license must be enabled on the cluster. All the nodes in the cluster must be healthy. Each node must have at least two correctly configured ports for each protocol (FC and FCoE).
NO.5 You have a FlexVol volume with LUNs and need to set policies to prevent an ENOSPC error on the host. In this scenario, which two commands will keep the LUN available to the host? (Choose two.)
A. volume autosize
B. snapshot autodelete
C. snapshot delete
D. volume size
Answer: B, C
Explanation:
ENOSPC is a UNIX operating system error that sometimes returns the message Not enough space is available to service your request.” The error message occurs because of a shortage of file system space or a lack of available media blocks.
Note: We get ENOSPC errors because Data ONTAP lets the Snapshot copy grow into the volume space. Each writes in WAFL is a write to a new block. If an old block is part of a Snapshot copy, Data ONTAP needs to preserve the old block and the new changed block.
This is not a problem specific to NetApp. Every storage vendor who supports a snapshot feature has to deal with it.
NO.6 To log in to the cluster with OnCommand System Manager, a cluster administrator account must be authorized for which two application types? (Choose two.)
A. HTTP
B. SSH
C. ONTAPI
D. service processor
Answer: A, C
Explanation:
You must have a cluster user account configured with the admin role and the HTTP, ontapi, and console application types.
NO.7 When a two-node cluster is expanded, which cluster configuration would be supported?
A. a 4-node switched cluster
B. a 4-node switchless cluster
C. a 3-node switched cluster
D. a 3-node switchless cluster
Answer: A
Explanation:
If you are adding nodes to a two-node switchless cluster, you must have installed and configured the cluster management and interconnect switches before adding additional nodes. The switchless cluster functionality supports only in a two-node cluster.
Thre are a lot of questions you can from NetApp training sites for Netapp Certification NS0 158. You must practice them as well before attending the exam.